Black Friday 2025!

VEKTA.5 & VESLA.5 Spindle Bushings Set [KV2250]

Set contains part numbers: KV5567, KV5578, KV3351

$15.39

VEKTA.5 M4 Button and Flat Screw Set [KV9902]

Set contains part numbers: KV3339, KV3340, KV3341, KV3389, KV3391, KV3364

$6.29

VEKTA.5 Locknut 3, 4, 5, and 6mm [KV9905]

Set contains part numbers: KV3331, KV3332, KV3333, KV3334

$4.99

Serial Batteries Connector with XT150 plugs [KVS147]

You can use these connectors to extend the cabling set-up on your rig.

$12.99

Kraken VESLA.5 Pinion Gear T19 (Gas) [KVS131]

Stock replacement (powder metal) gear for the VESLA.5. Part is strong with copper infusion. Please be advised that colors may vary from part to part.

$14.99

TAYLOR VESLA Titanium Hinge Pin Set (8pcs)

A set of precision machined hinge pins for your kraken Vesla Gas or Brushless Model! They feature an upgraded Clipless design for maximum reliability. They are secured in place by the supplied M4 Flanged Dome bolts (10.9 zinc).Turned from Grade 5 Titanium round bar and with a machined Hex on the end for easy tightening in the limited space on a Baja! This set replaces all the stock E-clipped Front End and Rear Lower hinge pins on the Vesla (8pcs)

$79.75

VEKTA.5 Roll Cage [KV8801]

Stock roll cage for VEKTA.5.

$169.99

VEKTA.5E ARTR Vinyl Wrap [KV3640]

Vinyl Wraps for stock Kraken VEKTA.5E ARTR.

$39.99

Kraken RC X2E HPI Baja Extended Arm Conversion Kit [KRC50005]

Kraken RC extended arms kit is a direct conversion kit to any stock HPI Bajas with no modifications. This conversion kit not only gives you a cool extended and scale look to your builds, but adds extra stability due to it’s wider stance. Extended arms also make your Bajas a little more fun to drive whether you are racing or straight out bashing. These molded arms are lightweight, tough and can handle any driving conditions you may throw at them. Kraken RC X2e molded arms kit is also a lighter option compared to aluminum. It is no wonder that the X2e is the #1 extended arms upgrade for the HPI BAJAS! Parts Included in this Kit: 2 Front lower arms 2 Front upper arms 2 Rear lower arms 2 Rear uppers arms 1 set of M6 x 60mm Technical Specs Extends the Baja wheelbase by 2” / 5 cm Molded Arms - Dupont Super Tough MADE IN USA Blend Polymer Kraken RC X2e Molded Arms - 614 grams / 1lbs 5 oz

$179.95

Kraken VESLA.5 Hardware Set [KVS149]

Complete hardware set for the VESLA.5

$44.95

Bead Lock Screws Set [KV9923]

High grade 12.9 spec alloy bead lock screws. Set of 80 for four-wheel setup.

$12.99

VEKTA.5 Alloy Transmission Housing Set [KV2233]

Set contains part numbers: KV4407, KV4410, KV4435, KV3361, KV3362, KV3372, KV3388

$83.59

Sold out

QS8 Male Plugs For ESC [KVS413]

QS8 Male Plugs Pair. For soldering, a "Y" to your ESC (purchased from us, add $10.)

$9.99

View product

VEKTA.5 M6 Button, Flat and Cap Screw Set [KV9904]

Set contains part numbers: KV3353, KV3350, KV3351, KV3361, KV3372

$12.99

VEKTA.5 & KV5TT Rear Upper Link Rod Set [KV2273]

KV5TT replacement rear upper link rod - set of 2. Updated 12mm HD and threaded for 8mm set screws

$22.99

VEKTA.5 T19-22 Transmission Step Gears [KV5568]

$43.99

VEKTA.5 Front/Rear Differential Ring Gear [KV2237]

Part number:KV5544.

$39.99

Billet Aluminum KV5TT Front Uppers Arms with Heim Joints [KT6203]

Machined T6061 Billet Aluminum Front Uppers Arms with Heim Joints. Only compatible on KV5TT.

$129.99

Kraken VESLA.5 Rear Shock Tower [KVS114]

Stock replacement part for the VESLA.5. T6061 Billet Aluminum.

$39.99

V2 Titanium Clipless Layshaft for HPI Baja 5B/5T/5SC [KRC90018]

Resurrected and back from the dead, we are now offering a V2 version of our popular Titanium layshaft with Titanium LH threaded Hex screw. This setup is even lighter than before but shows the strength of steel and, most importantly, provides better efficiency in unsprung weight. When racing, every bit of efficiency helps! Geometrically beefier than stock, our Ti version of layshaft is super lightweight and strong. Made out of certified Milt-Spec 6AL4V Aerospace Grade Titanium, this layshaft will help you shave as much as 35% of weight compared to stock layshaft! Nut is Left Hand threaded to prevent it from spinning loose. This is a direct replacement for HPI86630; it will only fit the gas version of the HPI Baja. Technical Specs Milt-Spec TI 6AL4V Aerospace Grade (Grade 5) Clipless Design - LH Threaded Titanium Hex Screw (No hex hole to strip) 35% Reduction in weight compared to steel!

$69.99

VEKTA.5 & VESLA.5 Steering Drag Link Bolt (set of 2) [KV5507]

$6.92

VEKTA.5 Frame Rods (Set of 4) [KV5513]

$27.99

VEKTA.5 Clutch Bolt [KV5526]

$11.29

VEKTA.5 Front Mount for Vertical Frames (set of 2) [KV5563]

$14.99

VEKTA.5 Front Cage Support Pin [KV5591]

$6.99

VEKTA.5 4 Link Suspension Bracket Set [KVT17]

Tree contains part numbers: KV8857, KV8858

$16.99

VEKTA.5 Clutch Bell [KV4421]

$34.99

VEKTA.5 Steering Drag Link and Hardware Set [KV2253]

Set contains part numbers: KV5507, KV5512, KV4415

$20.45

VEKTA.5 Throttle/Brake Servo Horn 25T [KV2266]

Stock Throttle/Brake Servo Horn, 25T for use on Kraken Servo TS-555HV only

$12.09

VEKTA.5 Shock Stop 8mm Stud [KV2263]

Front shock stop. Prevents front shock from popping off. This is an upgrade with 8MM studs and would require boring a larger hole on the shock stand. We recommend using a 8.1mm drill bit. Not compatible with the lightened billet upgrade shock tower (KV6608). Set contains part numbers: KV5593, KV5594, KV3349, KV3364

$24.99

VEKTA.5 & VESLA.5 Shock Seal Cap (set of 2) [KV5559]

$27.99

KV5TT Roll Cage Side Rubber Mount (set of 2) [ KT2301]

Side rubber mounts for KV5TT roll cage

$6.99

VESLA.5 / KV5TT Spare Tire/Battery Straps (set of 2) [KT2302]

KV5TT rear tire straps set for the KV5TT. Also fits VESLA.5 (Brushless) Battery Trays.

$7.99

KV5TT Billet Aluminum Heavy Duty Bumper Set [KT6202]

HD Bumper Set for KV5TT CNC from Billet Aluminum. Hard anodized. Comes with 4, 12.9 grade Cap Screws.

$39.99

Kraken VESLA.5 Brake Pin (Set of 2) [KVS135]

Stock replacement set for the VESLA.5.

$6.99

Vesla Flanged Ball,B13.8M5 [KVS121]

$7.49

Kraken VESLA.5 Slipper Nut [KVS132]

Stock replacement part for the VESLA.5.

$8.99

Kraken VESLA.5 O-rings Set [KVS151]

$7.99

Universal 1/5 Scale 3 Hole Gas Tank Grommet [KVS159]

Universal fit 3-hole gas tank grommet.

$3.99

TAYLOR VEKTA 7075 Billet Shock Tower

Our TAYLOR Billet Shock Tower upgrade for the Kraken Vekta 5 has been machined from AL7075 and finished off in our famous polished billet style! These towers feature the new standard 8mm shock mounting holes. This tower offers you the Ultimate in strength and lots of extra adjustment for tuning your suspension with different positions for mounting the shock.Also you will be pleased to know that we have reduced weight below the stock tower by 5 grams despite the denser material and extra size for adjustment!

$79.99

UFC/BLACKBONE 8750RPM HD Steel Clutch

This clutch is a match made in heaven! The awesome (and great value) Blackbone 9500rpm spring combined with the UFC ultra HD steel shoes (heavier than FS for more force and wider for more grip). This combination of spring/shoes results in approximately 8750 RPM, very strong biting point. Works extremely well on large small block engines and small big block engines. Comes as photo, with hardware

$42.95

TAYLOR Billet 3PC HD VESLA Transmission Housing

Some pure Taylor innovation here with our new stunning 3pc Gearbox design for the new Kraken Vesla Gas Rigs. (doesnt fit perfectly to the electric versions due to all being 1pc billet up to the back of the gearplate and thus the motor strap doesnt fit and the brushless gear plate is different too.) This gearbox features loads of cool upgrades over the stock 2pc design, as below: Easier diff servicing and tuning access Tighter bearing tolerances (especially the main centre axle bearings) Ability to run Larger HD Driveshaft cups which will no doubt appear in future Incorporated front hinge pin brace for added strength LH input shaft bearing dirt/water sheilding Precision sealing lip built into front case halves Extreme weight reducing pockets milled from all sides. Stunning Taylor machining throughout to bling up your build!

$179.95

TAYLOR Billet KRAKEN V1/V2 Rear Axle Housing Cover (not for latest F9 axle)

This neat TAYLOR Billet Axle cover fits your Kraken Vekta or KV5TT rear axle housing to add some bling to the rear end!Finished off with the TAYLOR Logo engraved in the face. Use this as a replacement for KV5584 or KT8917

$49.95

Hardened Steel Input & Diff Ring Gear set (2) for Kraken Vesla.5 transmisson [KVS226]

A pair of upgrade hardened steel transmission gears for the Vesla to fit the smallest (layshaft) input gear and the largest (diff) ring gear from the Vesla Gearbox. This set of 2 is made to suit anyone who already bought a Taylor HD idler or Big bore HD idler gear for their matching gearboxes but wants to upgrade the rest of the gears on their car

$99.99

Taylor Vekta HD Hardened Steel Slipper Shaft

Premium Heavy Duty upgraded Slipper shaft for all ages of Kraken Vekta.5, Vekta 5E and KV5TT! This is often a high stress point for powerful builds and our upgraded shaft is made from a High Tensile strength Steel Alloy to strengthen your RC and eliminate this failure point! A direct replacement for KV5529

$29.99

TAYLOR Billet WT Carb Velocity Stack

Billet Velocity stack to suit Walbro WT style carbs. These will be a great pair with the WT-668, WT-990, WT-1048. WT-1107 and WT-1257 Extreme. This would be suggested for use with the Kraken VESLA Gas Roller model with the RAM Air Filter. Optimal design to produce maximum air flow into the carb while still maintaining the ease of use internal bolt design. The bellmouth Venturi is shaped to best reduce the impact of bolt heads. A pair of M5x55 zinc plated carb bolts are included for convenience.

$18.99

A collection of black hardened steel pinion gears with an 8mm bore, arranged together against a dark background.

Taylor Hardened Steel 1.5 Mod Brushless Pinion Gear - 8mm Bore

High quality Carbon Steel Pinion gear to suit any motor with an 8mm shaft and car running 1.5 Mod Gears. Suits Kraken Vekta, Vesla, Losi 5T, DBXL etc builds. Fits Hobbwing Max4 and Max5 Combo kits running the 560kv, 650kv, 800kv and 1100kv EZRUN motors, plus many more!

$18.99

View product

Kraken RC X3-V2 Steel Polymer HPI Baja Chassis - Black [KRC80000]

The all new Kraken RC X3-V2 is the next generation Hi-Tech Chassis developed for the HPI Baja Series. This V2 chassis is now lighter than it's previous generation. It is engineered with our Super Tough Polymer and molded in with a 4mm steel plate in the front kick up. This is as tough as it comes! The X3-V2 is the perfect choice for those who seek the Ultimate Chassis for their HPI and Rovan Baja! Technical Specs - Baseline 10 mm (Stock 4 mm)- Front Kick Up is embedded with 4 mm hardened Steel Plate (Total thickness 12 mm)- Material: Hybrid Polymer- Impervious to Gasoline - Weight: 673 Grams

$99.99

Black Friday 2025!

Enjoy exclusive savings

Our best sellers