Black Friday 2025!

HD T6061 Billet Aluminum Gear Plate VESLA.5 (Electric) [KVS207]

Optional T6061 billet part. Lighter than stock (cast metal) version with a gloss silver finish.

$99.99

VEKTA.5 M6 Button, Flat and Cap Screw Set [KV9904]

Set contains part numbers: KV3353, KV3350, KV3351, KV3361, KV3372

$12.99

VEKTA.5 Front/Rear Differential Ring Gear [KV2237]

Part number KV5544

$39.99

VEKTA.5 Frame Rods (Set of 4) [KV5513]

$27.99

VEKTA.5 Front Mount for Vertical Frames (set of 2) [KV5563]

$14.99

VEKTA.5 & VESLA.5 Shocks Plastic Assembly Kit [KVT16]

Tree contains part numbers: KV8850, KV8851, KV8852, KV8853, KV8854, KV8855, KV8856

$15.99

VEKTA.5 & VESLA.5 5mm Wheel Hex Pin Set [KV9910]

Set contains part numbers: KV5503, KV5520

$7.69

Taylor Titanium Kraken Vekta & Vesla Steering posts (2)

This set of ultra lightweight yet very strong VEKTA and VESLA steering posts have been precision machined from a bar of Grade 5 Titanium Alloy. Supplied with 10.9 strength zinc coated fitting hardware.

$44.95

Billet CNC Spring Perch set BLACK (2) for VEKTA.5 & VESLA.5 [KV2267B]

Add style and strength to your RC with Kraken RC billet CNC machined spring perches for your VEKTA.5 and VESLA.5. Made from a high quality aluminum these are a direct fit for the stock shocks. Finished in a stealth black anodized finish

$17.95

Metal rod with bearings and small copper components on a white background

Billet Aluminum HD Servo Link for VEKTA & VESLA [KV6159]

This factory upgrade Servo Turnbuckle link made for the VEKTA, VESLA & KV5TT will fit both the gas and electric versions. The center rod is CNC machined from ultra strong aluminum with hardened precision fit chromoly ends. Sold with Hard Brass Bushes on the fixing points.

$24.99

Two metal brackets with screws on a white background

Billet Aluminum HD VEKTA.5 Cantilever Set [KV6157]

Kraken Factory Upgrade Billet CNC Cantilevers offer greater suspension tuning options as well as they re-position the sway bar so it no longer gets hit by the upper link mount upon full compression of the suspension. Machined from Solid 6061 Aerospace Aluminium.

$37.99

F9 Curry Inspired Rear Solid Axle Housing (V3) [KV5583]

New Currie Industries-inspired F9 Rear Solid Axle Housings. The pinless paddle-style redesigned drive shaft offers more direct power to the wheels. They are machined out of T6061 Billet Aluminum. Works great for 12S set-up of Big Bore engines. Fits VEKTA.5 or VEKTA.5E only. It is not suitable for KV5TT. The VEKTA.5 is not included. It is intended for illustration only. What is included: Rear Axle Billet Housing Rear Axle Billet Cover Drive Shafts Bearings Spacers Hardware Note:The center diff assembly with holders and the wheel hex drivers are not included. You need to remove them from your current set-up and install them in the new housing. Installation Manual: Click Here

$449.99

KV5TT Front Hood Body Section - V2 [KT8913]

Pre-order - V2 Thicker 1.5mm Body Stock KV5TT Front Hood Body Section (Pre-cut)

$99.99

Kraken RC Tire Rack Bracket Kit for VEKTA, VESLA & TSK [KRC70003]

Specially designed for the TSK-B and Sidewinder SX5 roll cages. This will also fit the VEKTA and VESLA buggies! The tire rack not only gives you a realistic look, it also allows you to mount a full size truck tire as a backup in case of a tire blowout. The bracket also bridges the gap of the rear roll cage and provides a stable base for mounting a GoPro Camera. Mounting hardware is included.

$49.99

Big Bore Hardened VESLA.5 Gear Set for Gas 51T/25T [KVS224]

This gearing is best suited for Big Bore Gas Engine 46-50cc application using a 54mm clutch. 51T/25T (76). Mounts directly to your VESLA using the slipper clutch style layshaft. These are made to work with the original Kraken RC Clutch bell. They will not fit Blackbone style clutch bells. Please note this spur gear is only a match for the VESLA models with a slipper clutch style layshaft. This spur gear will not fit the slipper clutch eliminator style layshaft.

$74.99

Sold out

HD Hardened VESLA.5 Gear Set for Electric 51T/25T [KVS225]

This High-Ratio Speed gearing is for Electric Brushless VESLA.5 51T/25T (76). Direct drive gearing that mounts directly to your VESLA slipper clutch style layshaft. Please note this spur gear is only a match for the VESLA models with a slipper clutch style layshaft. This spur gear will not fit the slipper clutch eliminator style layshaft.

$74.99

View product

VEKTA.5 Front Bumper Set[KVT01]

Tree contains part numbers: KV8803, KV8804, KV8805

$35.99

KV5TT Rear Differential Outdrive & Sleeve Set [KT2307]

KV5TT Rear Diff Outdrive & Sleeve Set

$34.99

18T MOD 1.5 Pinion Gear for VEKTA.5E & VESLA.5 [KV6143]

18T MOD 1.5 Pinion Gear fits VEKTA.5E only. For 8mm shaft. Compatible with the VEKTA.5E and VESLA.5 (Electric Only).

$16.99

19T MOD 1.5 Pinion Gear for VEKTA.5E & VESLA.5 [KV6144]

19T MOD 1.5 Pinion Gear fits VEKTA.5E only. For 8mm shaft. Compatible with the VEKTA.5E and VESLA.5 (Electric Only).

$16.99

VEKTA.5 Locknut 3, 4, 5, and 6mm [KV9905]

Set contains part numbers: KV3331, KV3332, KV3333, KV3334

$4.99

VEKTA.5 Rear Shocks Silicone Oil 150 CST [KV9914]

Stock rear replacement Shock Oil for the VEKTA.5 - 150CST.Content: 100cc Silicone Shock Oil. Enough for 2 rear shocks build. Pure Silcione Shock Oil. Made in Japan.

$11.99

KV5TT Billet Aluminum Heavy Duty Bumper Set [KT6202]

HD Bumper Set for KV5TT CNC from Billet Aluminium. Hard anodized. Comes with 4, 12.9 grade Cap Screws. Now made in a gloss finish silver these are a standout piece for your Trophy Truck! KT6202

$44.99

Kraken VESLA.5 Brake Disk and Pad Set [KVS154]

Contains items: KV5-BrakePad (2) KV5-BrakeDisc (1) BrakeScrewPin (2)

$19.99

VEKTA.5 & VESLA.5 Slipper Pad (set of 2) [KV4414]

$10.49

TAYLOR VESLA Billet Front Chassis Brace

The Ultimate Front Chassis Brace for your Kraken Vesla.5 Gas or Electric. A perfect balance of high strength and low weight with our unique design and of course, the TAYLOR machining finish leaves our competitors behind completely! This brace will fit both stock and our aftermarket chassis and of course both stock and billet front upper steering braces. Supplied with correct fitting hardware in Bright Zinc plate.

$29.99

TAYLOR VESLA Billet LH Engine Bracket

This stunning billet bracket is a much stronger (and sexier!) direct replacement for the stock laser cut engine mount on the fan side of the engine. Supplied with fitting hardware

$29.95

Taylor Vekta HD Hardened Steel Slipper Shaft

Premium Heavy Duty upgraded Slipper shaft for all ages of Kraken Vekta.5, Vekta 5E and KV5TT! This is often a high stress point for powerful builds and our upgraded shaft is made from a High Tensile strength Steel Alloy to strengthen your RC and eliminate this failure point! A direct replacement for KV5529

$29.99

TAYLOR Billet WT Carb Velocity Stack

Billet Velocity stack to suit Walbro WT style carbs. These will be a great pair with the WT-668, WT-990, WT-1048. WT-1107 and WT-1257 Extreme. This would be suggested for use with the Kraken VESLA Gas Roller model with the RAM Air Filter. Optimal design to produce maximum air flow into the carb while still maintaining the ease of use internal bolt design. The bellmouth Venturi is shaped to best reduce the impact of bolt heads. A pair of M5x55 zinc plated carb bolts are included for convenience.

$18.99

KV5TT Middle Cab Body Section - V2 [KT8914]

Now featuring a thicker 1.5M polycarbonate construction Stock KV5TT Middle Cab Body Section (Pre-cut)

$139.99

Billet V2 Upgraded Main Chassis VEKTA.5 [KV6609]

Option part lightened Main chassis. Weight comparison: Stock 969 grams (2.13 lbs) vs 726 grams (1.6 lbs) for this option part. Updated in 2025 with a bright gloss silver anodized finish

$149.99

KV5TT Rear Body Fender - Right - V2 [KT8916]

Pre-order - V2 Thicker 1.5mm Body Stock KV5TT Rear Body Fender - Right (Pre-cut)

$49.99

KV5TT Rear Body Fender - Left - V2 [KT8915]

Pre-order - V2 Thicker 1.5mm Body Stock KV5TT Rear Body Fender - Left (Pre-cut)

$49.99

Bead Lock Screws Set [KV9923]

High grade 12.9 spec alloy bead lock screws. Set of 80 for four-wheel setup.

$12.99

VEKTA.5 M5 Button, Flat, and Cap Screw Set [KV9903]

Set contains part numbers: KV3388, KV3344, KV3345, KV3346, KV3347, KV3348, KV3396, KV3357, KV3397, KV3365, KV3366, KV3367, KV3369

$33.99

VESLA.5 Idler Gear for Big Bore Transmission Case [KVS213]

VESLA.5 Idler Gear for Big Bore Transmission Case Heat-treated and hardened Idler gear for Big Bore applications. Only fits the Bore Bore Case. Includes 2x 20x32x7mm Bearings.

$34.99

Kraken Wheel Set of 2 fits VEKTA.5 & VESLA.5 [KV2204]

Set contains part numbers: KV8811, KV8812

$44.99

HD T6061 Billet Aluminum Gear Plate VESLA.5 (Gas) [KVS205]

Optional T6061 billet part. Lighter than stock (cast metal) version.

$99.99

21T MOD 1.5 Pinion Gear for VEKTA.5E & VESLA.5 [KV6145]

21T MOD 1.5 Pinion Gear fits VEKTA.5E only. For 8mm shaft. Compatible with the VEKTA.5E and VESLA.5 (Electric Only).

$16.99

VESLA.5 Layshaft for Big Bore Transmission Case (Gas) [KVS161]

Big Bore transmission case layshaft that utilizes secondary bearing support. This is for gas use only. This is made to fit the KVS206 Big Bore transmission only and the Kraken slipper clutch.

$24.99

VEKTA.5 19T Transmission Pinion Gear [KV5537]

$21.69

VEKTA.5 (Front) - VESLA.5 (Front and Rear) Shock Spring Set [KV5561]

These springs work for VEKTA and VESLA. However for VESLA, they work for the rears also.

$24.99

VEKTA.5 Front Cage Support Pin [KV5591]

$6.99

VEKTA.5 Roll Cage Brackets [KV2208]

Set contains part numbers: KV8823, KV8824, KV8825

$15.29

VEKTA.5 Brake Disc and Pad Set [KV2227]

Set contains part numbers: KV5527, KV4411, KV4412

$17.48

VEKTA.5 Front Shock Shaft and Piston Set [KV2243]

Set contains part numbers: KV8851, KV5557, KV3334, KV3381

$31.99

TAYLOR RC Truck Flag

Custom printed TAYLOR Logo Flag, for decorative purposes you can cable tie to your Rig!Not Totally Bash Proof!! They are made onto a plastic pole which has a fair amount of flex but its not indestructible and will surely break in a full on high speed roll over where it takes direct impact We supply them for a bit of fun with our RAM engine kits to attach to the back of the monster like a real monster jam truck!

$9.99

TAYLOR V2 Billet VEKTA/KV5TT Chassis

We are pleased to present our updated, V2 kraken upgrade chassis milled from 6mm Billet 6082 Aluminium. We have increased strength significantly around the engine mounting areas to suit large high torque, high vibration engines and improved the front kick up area also.With our milled pocket design it weighs in at just 707g despite also being stronger than stock. he stock chassis weighs approximately 1kg.Engraved with our logo, this is simply the ultimate upgrade part for your Kraken Vekta or KV5TT.

$189.95

Black Friday 2025!

Enjoy exclusive savings

Our best sellers