Black Friday 2025!

Hardened Machine Cut 57T Steel Spur Gear VESLA.5 [KVS204]

Optional Machined cut 57T Spur Gear. Replacement for stock plastic version.

$54.99

VEKTA. 5 Flat Washer Set [KV9907]

Set contains part numbers: KV3387, KV3362, KV3383, KV3401, KV3380, KV3385, KV3381

$6.99

Taylor Kraken Vekta/Vesla Titanium Diff Cross pin set (2)

HD Titanium Titanium Grade 5 (Ti6AL4V) precision machined Cross pins for all Kraken Vekta/TT and Vesla Differentials!

$21.95

VESLA.5 HD 7075 Billet Steering System [KVS227]

Our newest upgrade for the VESLA is one of performance and style. This steering rack system is machined from tough 7075 billet aluminum. The drag link is finished with a set of pre-installed bearings ensuring smooth operation and minimizing play. The servo saver maintains adjustability with the factory spring and collar and has a nice cam profile keeping your servo from being damaged in a hard impact. These are a direct fit and require no modifications.

$99.95

TAYLOR Billet WT Carb Velocity Stack

Billet Velocity stack to suit Walbro WT style carbs. These will be a great pair with the WT-668, WT-990, WT-1048. WT-1107 and WT-1257 Extreme. This would be suggested for use with the Kraken VESLA Gas Roller model with the RAM Air Filter. Optimal design to produce maximum air flow into the carb while still maintaining the ease of use internal bolt design. The bellmouth Venturi is shaped to best reduce the impact of bolt heads. A pair of M5x55 zinc plated carb bolts are included for convenience.

$18.99

TAYLOR Billet Wheel Nuts - Kraken & Losi 5T 5ive 2.0 Thread

This set of stunning Billet 24mm Wheel nuts in an enclosed design with our logo laser etched to the face will be the perfect finishing touch to any build! They have been made with a flat inside face to suit Billet Wheels (theres nothing worse than a knurled nut chewing up your lovely billet wheels when its not needed!). However they are also supplied with a set of Genuine Schnorr locking washers for use when plastic wheels, best of both worlds!! Compatible with: Taylor Wheel extenders, Losi 5ive-T, Kraken VEKTA, KV5TT & VESLA. Also compatible with Rovan LT, KM X2 and 30N DTT Trucks with Losi thread.

$39.99

VEKTA.5 & VESLA.5 Radio Tray Box and Cover [KVT11]

Contains part numbers KV8837, KV8838.

$15.99

VEKTA.5 & KV5TT V2 Center Drive Cup Set [KV2270]

VEKTA.5 / KV5TT V2 Center Drive Cup replacement Set **Replaced KV2229**

$29.99

Kraken VESLA.5 Front or Rear Sway Bar Kit [KVS158]

VESLA.5 sway bar kit fits directly on the rear. For front use, shorten each side by approximately 18 mm.

$37.99

VEKTA.5 Slipper Shaft [KV5529]

$17.59

VEKTA.5 & VESLA.5 Engine Washer (set of 4) [KV5575]

$6.59

VEKTA.5 Metal Roll Cage Inserts (set of 4) [KV5579]

$13.99

Sold out

VEKTA.5 & VESLA.5 Wheel Beadlock (set of 2) [KVT04]

contains part numbers: KV8813, KV8814

$12.99

View product

VEKTA.5 Front/Rear Shock Internal Seals and Bushing Set [KV2242]

Set contains part numbers: KV8852, KV8853, KV8856, KV4433, KV3303

$19.99

VEKTA.5 Throttle/Brake Linkage Set [KV2248]

Set contains part numbers: KV8843, KV8844, KV8845, KV5502, KV5511, KV5550, KV5551, KV5573, KV5574, KV4442, KV3330, KV3331, KV3336, KV3355, KV3373, KV3403, KV3402

$21.99

TAYLOR VESLA Billet Chassis Center Brace

A totally innovative Taylor Upgrade your Kraken Vesla.5 Gas or Electric, this part was born from a personal feeling that for High power Vesla builds, or hard bashed ones, the chassis could do with some extra bracing in the centre of the car, to prevent any bending or bowing. So we created this trick 3D machined brace which braces right through the middle of the car and also incorporates the fuel tank mount. A lot of time and effort went into making this brace look good, while solving a potential problem that could occur from hard use. We have also added two new M4 holes at the front of our new brace, allowing us to at a later date make another brace which fits to the Throttle servo mounts (we may make billet ones to suit this), so that the bracing effect can be transferred right from front to back of the car. Supplied with correct fitting zinc plated hardware

$74.99

HD Billet Aluminum VEKTA.5 Rear Lower Trailing Arms [KV6150]

KRAKEN is proud to introduce the all-new HD Trailing Arms Upgrade for our VEKTA.5, E and TT. Our HD rear trailing arms are slim-lined, less bulky, and have a weight-saving design that doesn't compromise strength!Machined out of T6061 billet aluminum that uses Heim joints instead of the plastic rod ends. A bulletproof set-up and lighter set-up for your rigs. Set it and forget it! Weight Comparisons: Beast RC - 527g/18.6oz Kraken's - 403g/14.2oz A significant 4.4oz savings in weight! What is included: 1 set T6061 Billet Aluminum Trailing Arms (Does not support stock plastic rod ends) 4 Sets of High-Grade Stainless Steel Heim Joints 8 Machined Spacers for Heim Joints Hardware

$119.99

Kraken VESLA.5 Bearing Set [KVS150]

Stock replacement bearing set for the VESLA.5.

$44.99

VEKTA.5 & VESLA.5 Kraken ATD Tires (set of 2) [KV4408]

$34.99

VEKTA.5 M6 Button, Flat and Cap Screw Set [KV9904]

Set contains part numbers: KV3353, KV3350, KV3351, KV3361, KV3372

$12.99

VEKTA.5 & VESLA.5 Shock Stand (set of 2) [KV5509]

$12.99

VEKTA.5 Center Drive Shaft [KV2222]

Set contains part numbers: KV5514, KV5517, KV3392

$22.99

VEKTA.5 Brake Cam Set [KV2228]

Set contains part numbers: KV5528, KV5552, KV5571, KV5590

$20.89

VEKTA.5 & VESLA.5 Spindle Bushings Set [KV2250]

Set contains part numbers: KV5567, KV5578, KV3351

$15.39

Kraken VEKTA.5 Set Screws 3, 4, 5, 6 and 8mm [KV9906]

Set contains part numbers: KV3373, KV3374, KV3393, KV3392, KV3393, KV3370 KV9906

$12.29

TAYLOR Billet BAJA/VEKTA/LOSI Fuel Gas Cap

Sweet little bling upgrade to suit some popular 1/5 Scales (as below), this cap is also lighter than other billet caps we tested. HPI (or other brand) BAJA 5B/5T/5SC LOSI 5T and 5T 2.0 LOSI TLR 5B LOSI DBXL 2.0 (larger thread than older DBXL) KRAKEN VEKTA and VEKTA TT Any other platforms sharing any of the above tank threads.

$18.99

TAYLOR Billet VEKTA/KV5TT Front Diff Housing

This show-stopping Kraken Billet Diff Housing will add supreme support for your front Differential gears to ensure long life even with our huge HP Big bore engines. Features: Oversize pinion gear support bearings (supplied) A stylish Billet Anti-Roll bar bracket (supplied with hardware) Allows fitment of either the stock shock tower or our Billet 7075 Vekta and KV5TT towers. Supplied with Stainless fitting hardware.

$199.75

Billet Differential Locker System for VEKTA & VESLA [KV6158]

This Factory Upgrade Billet CNC Diff Locker is machined from 7075 Aluminium and Anodised Gloss Silver It features a 2 part design with dowels to locate and align the halves once you have fitted your output cups to each half. Then assemble with the supplied hardware to your VEKTA, KV5TT or VESLA Diff Ring Gear. This locker eliminates the need for the differential gasket. Fully locks the diff Differential once fitted. Differential Ring Gear, outdrives, and bearings are not included. Installed photos are for illustration purposes only

$34.99

Metal rod with bearings and small copper components on a white background

Billet Aluminum HD Servo Link for VEKTA & VESLA [KV6159]

This factory upgrade Servo Turnbuckle link made for the VEKTA, VESLA & KV5TT will fit both the gas and electric versions. The center rod is CNC machined from ultra strong aluminum with hardened precision fit chromoly ends. Sold with Hard Brass Bushes on the fixing points.

$24.99

VEKTA.5 M5 Button, Flat, and Cap Screw Set [KV9903]

Set contains part numbers: KV3388, KV3344, KV3345, KV3346, KV3347, KV3348, KV3396, KV3357, KV3397, KV3365, KV3366, KV3367, KV3369

$33.99

VEKTA.5 Super Duty Stiff Rear Springs Set [KV6146]

These are the Super-Duty extra-stiff spring rears set for the VEKTA.5 Gas, VEKTA.5TT and Brushless VEKTA.5E Ultra. They are new and 4mm thicker in diameter than the stock 3.2 mm.

$24.99

HD T6061 Billet Aluminum Gear Plate VESLA.5 (Electric) [KVS207]

Optional T6061 billet part. Lighter than stock (cast metal) version with a gloss silver finish.

$99.99

25T MOD 1.5 Pinion Gear for VEKTA.5E & VESLA.5 [KV6149]

25T MOD 1.5 Pinion Gear fits VEKTA.5E only. For 8mm shaft. Compatible with the VEKTA.5E and VESLA.5 (Electric Only).

$17.99

Sold out

Kraken Wheel Set of 2 fits VEKTA.5 & VESLA.5 [KV2204]

Set contains part numbers: KV8811, KV8812

$44.99

View product

VEKTA.5 Front/Rear Differential Ring Gear [KV2237]

Part number KV5544

$39.99

Kraken RC Multi-Purpose Socket Tool [KV9920]

Multi-Purpose Socket tool for VEKTA.5 or VESLA.5. With this tool, you can tighten the wheel nuts and all sizes of rod ends with pivot balls installed.

$16.99

VEKTA.5 Aluminum Front/Rear Lower Arm Brace [KV5553]

$25.99

VEKTA.5 & VESLA.5 Fuel Tank Mounts [KVT13]

Tree contains part numbers: KV8841, KV8842, KV8843, KV8844, KV8845

$8.99

VEKTA.5 M4 Button and Flat Screw Set [KV9902]

Set contains part numbers: KV3339, KV3340, KV3341, KV3389, KV3391, KV3364

$6.29

Kraken VEKTA.5 & VESLA Shock Silicone Oil 150 CST [KV9914]

Stock rear replacement Shock Oil for the VEKTA.5 - 150CST. Stock front shock fluid for the VESLA. Content: 100cc Silicone Shock Oil. Enough for 2 rear shocks build. Pure Silicone Shock Oil. Made in Japan.

$11.99

Kraken VESLA.5 Spur Gear 57T Black [KVS106]

Stock replacement part for the VESLA.5.

$11.99

Taylor Vekta HD Hardened Steel Slipper Shaft

Premium Heavy Duty upgraded Slipper shaft for all ages of Kraken Vekta.5, Vekta 5E and KV5TT! This is often a high stress point for powerful builds and our upgraded shaft is made from a High Tensile strength Steel Alloy to strengthen your RC and eliminate this failure point! A direct replacement for KV5529

$29.99