Black Friday 2025!

VESLA.5 HD V1 Matte Rear Billet Aluminum Arms [KVS216V1]

These are the original V1 "matte finish" silver style aluminum optional arms. Available at a discounted price while inventory lasts. Upgraded billet rear arms for the VESLA.5. We highly recommend using our ultimate titanium hinge pins in conjunction with these arms: KVS212

$99.99

~~$149.99~~ $99.99

VEKTA.5 Kraken Mega Shocks Complete Set (Front) [KV2246]

A complete pair of FRONT Shocks for the Kraken VEKTA.5 and VEKTA.5 TT. Set contains part numbers: KV8850, KV8851, KV8852, KV8853, KV8854, KV8855, KV8856, KV5508, KV5509, KV5555, KV5557, KV5559, KV5560, KV5561, KV4433, KV3302, KV3303, KV3334, KV3347, KV3381, KV3501

$179.99

Sold out

Kraken Sidewinder SX5 Body Panel set [KRC70080]

Replacement Panels set for the Kraken SX5. Full set (Clear)

$159.99

View product

VEKTA.5 Founders Wrap [KV3641]

Kraken VEKTA.5 Founders Vinyl Wraps. Fits VEKTA.5 only.

$39.99

Sold out

VEKTA.5TT Assembly Kit Manual [KV3618]

VEKTA.5TT ASSEMBLY KIT MANUAL

$14.99

View product

Sold out

VEKTA.5 KV5TT Stock Manual [ KV3619]

VEKTA.5 TT STOCK MANUAL

$14.99

View product

VEKTA.5 Rear Shock Support 8mm Stud [KV2264]

Rear shock stop with upgraded 12mm cross bar (10mm stock). Prevents rear shock from popping off. This is an upgrade with 8MM studs and 12mm bar and would require boring a larger hole on the vertical frames. We recommend using a 8.1mm drill bit. Not compatible with the HD billet upgrade rear vertical chassis plates (KV6602/3). Set contains part numbers: KV5593, KV5594, KV5595, KV3364

$34.99

KV5TT Rear Spare Tire Mounting Bolts (Optional) [KT6201]

KV5TT Rear Spare Tire Mounting Bolts to replace the tire straps

$4.99

VEKTA.5 Transmission Spur Gear [KV5534]

$49.99

VEKTA.5 Air Filter Set [KV2256]

Set contains part numbers: KV8859, KV8860, KV8861, KV8862, KV4424, KV4432, KV3301, KV3338

$35.99

Kraken VESLA.5 Plastic Set B [KVS109]

Stock replacement set for the VESLA.5.

$23.99

Kraken VESLA.5 Transmission Case [KVS107]

Stock replacement part for the VESLA.5.

$24.99

Replacement O-Ring Set for V2 Drive Cups / U-Joints [KV2274]

Replacement O-Ring Set for V2 Drive Cups / U-Joints - KV2270, KV2271. Hi temp, Hi tensile Durometer 75 O rings.

$6.99

VEKTA.5 Clutch Bolt [KV5526]

$11.29

Sold out

VEKTA.5 & VESLA.5 Pin 3x60 [KV5576]

$1.64

View product

VEKTA.5 Turnbuckle Set for Front Upper Arms (set of 2) [KV5582]

$13.99

VEKTA.5 Rear Sway Bar Kit w/ Torsion Levers [KV2236]

Set contains part numbers: KV5540, KV5580, KV5581, KV4418, KV3393

$39.99

VEKTA.5 Throttle/Brake Servo Horn 25T [KV2266]

Stock Throttle/Brake Servo Horn, 25T for use on Kraken Servo TS-555HV only

$12.09

VEKTA.5 Shock Stop 8mm Stud [KV2263]

Front shock stop. Prevents front shock from popping off. This is an upgrade with 8MM studs and would require boring a larger hole on the shock stand. We recommend using a 8.1mm drill bit. Not compatible with the lightened billet upgrade shock tower (KV6608). Set contains part numbers: KV5593, KV5594, KV3349, KV3364

$24.99

VEKTA.5 & VESLA.5 Shock Seal Cap (set of 2) [KV5559]

$27.99

Kraken VESLA.5 Brake Pin (Set of 2) [KVS135]

Stock replacement set for the VESLA.5.

$6.99

Kraken VESLA.5 Idler Gear T18 [KVS127]

Stock replacement (powder metal) gear for the VESLA.5. Part is strong with copper infusion. Please be advised that colors may vary from part to part.

$14.99

Kraken VESLA.5 Slipper Nut [KVS132]

Stock replacement part for the VESLA.5.

$8.99

Universal 1/5 Scale 3 Hole Gas Tank Grommet [KVS159]

Universal size 3 Hole Gas Tank Grommet. This fits common sizes of fuel tanks like the Kraken VESLA, VEKTA, Losi 5IVE-T, HPI Baja and 30N DTT and other clone models. Generally fits fuel tanks with a 19.5mm hole.

$3.99

Taylor Titanium Kraken Vekta Hinge Pin Set (6pcs)

A really nice little upgrade to any Vekta build, these titanium hinge pins are extremely strong, very light and hard wearing The stock Kraken hinge pin set comes in just under a hefty 175grams when including the little screws, our titanium kit is 99grams making a worthwhile saving to a heavy RC! The front inner hinge pins are not directly compatible with the KV5TT Trophy Truck. They need to be shortened in order to fit the TT upper arms.

$57.95

TAYLOR VESLA Titanium Stock Gas Layshaft

This trick, ultra low weight layshaft is a direct replacement for the heavy stock steel shaft for guys doing epic OEM style builds on their kraken Vesla C1G. Does not fit the electric version.

$69.95

TAYLOR Billet 3PC HD VESLA Transmission Housing

Some pure Taylor innovation here with our new stunning 3pc Gearbox design for the new Kraken Vesla Gas Rigs. (doesnt fit perfectly to the electric versions due to all being 1pc billet up to the back of the gearplate and thus the motor strap doesnt fit and the brushless gear plate is different too.) This gearbox features loads of cool upgrades over the stock 2pc design, as below: Easier diff servicing and tuning access Tighter bearing tolerances (especially the main centre axle bearings) Ability to run Larger HD Driveshaft cups which will no doubt appear in future Incorporated front hinge pin brace for added strength LH input shaft bearing dirt/water sheilding Precision sealing lip built into front case halves Extreme weight reducing pockets milled from all sides. Stunning Taylor machining throughout to bling up your build!

$179.95

TAYLOR Billet KRAKEN V1/V2 Rear Axle Housing Cover (not for latest F9 axle)

This neat TAYLOR Billet Axle cover fits your Kraken Vekta or KV5TT rear axle housing to add some bling to the rear end!Finished off with the TAYLOR Logo engraved in the face. Use this as a replacement for KV5584 or KT8917

$49.95

Kraken RC QS8 Anti-Spark RC Battery Connector Set (1 male/1 female)

The QS8 Battery connector is the standard for high voltage large scale RC cars and more! With massive 8mm gold plated bullet connectors these direct from the source QS8 connectors are capable of handling spikes of more than 300 amps and temperature of 200 degrees celsius. You can fit up to 6awg sized wire. These battery connectors are standard for the Kraken VEKTA KV5E Ultra 2 as well as the 12S VESLA C1E. We suggest these for use with all large scale RC models as these are the best connectors. Sold as shown with one male and one female connector set.

$12.99

Taylor VESLA HD Hardened Steel Dog Bone Kit - Enclosed Cup Design

Extremely Heavy Duty Kraken VESLA CNC Machined Heat Treated Steel Dog Bone Kit to replace the stock CVD style system This upgrade requires you to use the Taylor RC 3PC HD VESLA Transmission housing due the oversized output cups. The cups are large in size and will not fit through the stock VESLA transmission housing (or optional kraken vesla transmissions) These new HD dogbones a Taylor RC Hardened Steel 5x26mm Dog Bone Pins both sides instead of the 4mm pin found on the stock CVD style Bones. A smooth action floating pin design is used due to the solid enclosed design diff cups and stub axles. Please note, due to the large cup diameter and long pin length, customers using the stock plastic arms (slightly shorter ones) will need to move their bottom shock bolt out to the hole marked in last photo. This just removes the chance of the pin bottoming out on full droop as the vesla has an insane amount of suspension travel! This set includes 2x Inner Enclosed Billet Cups, 4x HD Drive pins, 2x Dog Bones and 2x Outer Enclosed Billet Cups.

$149.99

Sold out

Kraken Billet Ultimate Receiver Battery Box Replacement Thumb Screws [KV6611]

A pair of replacement battery box thumb screws for the Kraken RC Ultimate Receiver Box. These have a nice knurled finish making it easy to clamp down and tighten the battery box lid of the Ultimate Receiver Box upgrade for the VEKTA and VESLA models.

$7.49

View product

Kraken Complete Gear Set Upgrade Kit VEKTA.5 & KV5TT [KV6167]

This is the complete Kraken RC VEKTA Upgrade gear set. This includes the intermediate gear shaft and all optional gear sets at a sweet bulk Discount! When paired with the original factory pinion gear giving you eight total gear ratio options. This simply designed gear set is very strong. With the fixed gear of the intermediate gear shaft driving the spur gear of the VEKTA the keyway side is made to install the drive gear that will mesh with the pinion gear. With this clever setup and all four of the optional gear sets you have a total of 8 different gear ratios available for the VEKTA. This means that you can dial in the perfect ratio for whatever engine and tires you are using. These are made to work with the original factory transmission plates as well as the optional billet machined KV6135 Transmission X. For those using Big Block style engines requiring the use of a 62mm clutch bell we have an upgraded machined 62mm clutch bell available here KV6166.

$149.99

Billet Aluminum HD VEKTA.5 Front Trailing Arm Mount [KV6156]

Kraken Factory Upgrade Billet CNC Front Trailing Arm Mounts are a direct replacement for the stock KV4419 cast pieces. They offer greater strength at a lower weight! Machined from Solid 6061 Aerospace Aluminium.

$25.99

Black metal gear and smaller component on a white background

Kraken Intermediate gear VEKTA.5 & KV5TT [KV6161]

This Intermediate Gear Shaft is required to use the optional Kraken RC gear sets. This simply designed piece is very strong. With the fixed gear driving the spur gear of the VEKTA the keyway side is made to install the drive gear that will mesh with the pinion gear. With this clever setup and all four of the optional gear sets you have a total of 8 different gear ratios available for the VEKTA. This means that you can dial in the perfect ratio for whatever engine and tires you are using. These are made to work with the original factory transmission plates as well as the optional billet machined KV6135 Transmission X. For those using Big Block style engines requiring the use of a 62mm clutch bell we have an upgraded machined 62mm clutch bell available here KV6166

$29.99

Sale

Billet Aluminum HD VEKTA.5 V1 Matte Finish Front Differential Case [KV6107V1]

This is the matte finish upgrade differential case; available while inventory lasts at a discounted price! CNC T6061 Billet Aluminum Front Diff case for the VEKTA.5. Designed to take heavier loads with oversized pinion bearings (10x26x8mm) and comes complete with bearings.

$109.99

~~$139.99~~ $109.99

VEKTA.5 Main Chassis [KV4406]

$99.99

KV5TT Roll Cage [KT8904]

Stock roll cage for the KV5TT

$189.99

Kraken VESLA.5 Main Chassis [KVS115]

Stock aluminum chassis replacement part for the VESLA.5.

$134.99

Kraken TSK-b/VESLA.5 Roll Cage [KVS701]

$149.99

VEKTA.5E ARTR Vinyl Wrap [KV3640]

Vinyl Wraps for stock Kraken VEKTA.5E ARTR.

$39.99

KRAKEN X2E Rear Extended BAJA Arm Set [KRC50006]

Kraken RC X2E extended arms kit is a direct conversion kit to any stock HPI Bajas with no modifications. This conversion kit not only gives you a cool extended and scale look to your builds, but adds extra stability due to it’s wider stance. Extended arms also make your Bajas a little more fun to drive whether you are racing or straight out bashing. These molded arms are lightweight, tough and can handle any driving conditions you may throw at them. Kraken RC X2e molded arms kit is also a lighter option compared to aluminum. Note: Driveshafts are not included in this kit. We recommend the IRC UHD Extended Driveshaft kit as its not too heavy but offers superb strength. However all Extended Baja shaft kits will work perfectly. Features Parts Included in this Kit: 2 Rear lower arms 2 Rear uppers arms 1 set of M6 x 60mm Technical Specs Extends the Baja wheelbase by 2” / 5 cm Molded Arms - Dupont Super Tough MADE IN USA Blend Polymer Kraken RC X2e Molded Arms - 614 grams / 1lbs 5 oz Lightweight Aftermarket Aluminum Versions - 968+ grams / 2lbs 2oz+

$89.99

QS8 Male Plugs For ESC [KVS413]

QS8 Male Plugs Pair. For soldering, a "Y" to your ESC

$9.99

Sold out

VEKTA.5 Stock Manual [KV3620]

VEKTA.5 STOCK MANUAL

$14.99

View product

Sold out

VEKTA.5 - V3 Rear Axle Guide Sheet [KV3621]

VEKTA.5 - V3 REAR AXLE GUIDE SHEET

$2.99

View product

VEKTA.5 & KV5TT Rear Upper Link Rod Set [KV2273]

KV5TT replacement rear upper link rod - set of 2. Updated 12mm HD and threaded for 8mm set screws

$22.99

HD Billet Steel Clutch Bell VESLA.5 [KVS208]

Unlike stock which is made of 2 parts and soldered. This option part is CNC out of a block of billet steel. Super strong and recommended for larger engine use.

$44.99

Kraken VESLA.5 Decal - Black/Red [KVS152]

Type a description for this product here...

$39.99

XT60 to XT150 Charging Lead Set [KVS406]

2 pcs - XT60 to XT150 Charging Lead for use with GENS ACE Chargers.

$18.99

Black Friday 2025!

Enjoy exclusive savings

Our best sellers